 | DeWalt Diamond Tile And Glass Drill Bit 15mm DT6043 Extreme Diamond Tipped Tile Bit Allows Clean Concentric Holes In All Wall And Floor Tiles (up To And Including Class 5 Hardness), Porcelain, Marble, Granite And Slate. Ideal For Installing Fixtures And Fittings In Bathrooms And Kitchens. Main Features Diamond Grit Edged Head Easy Start Drilling At 45 Degrees Into Material And Copes With Almost Any Hardness Of Tile. Easy And Accurate Positioning Of Hole, Reduced Risk Of Walking Open Head Design Helps More Effective Cooling With Water. Water Greatly Improve.... Limited Stock |
|
 | Addax Diamond Tile And Glass Drill Bit Dry 6mm VBD6 The Dry Diamond Drill Bit Uses Vacuum Brazed Technology Which Allows The Dry Bit To Be Used At A Higher Temperature To Cut Through Hard Porcelain Tile, Ceramics, Marble And Slate With Ease. The Integrated Lubricant Aids Cooling And Prolongs Life Out of Stock |
|
 | Addax Diamond Tile And Glass Drill Bit Dry 7mm VBD7 The Dry Diamond Drill Bit Uses Vacuum Brazed Technology Which Allows The Dry Bit To Be Used At A Higher Temperature To Cut Through Hard Porcelain Tile, Ceramics, Marble And Slate With Ease. The Integrated Lubricant Aids Cooling And Prolongs Life In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Dry 8mm VBD8 The Dry Diamond Drill Bit Uses Vacuum Brazed Technology Which Allows The Dry Bit To Be Used At A Higher Temperature To Cut Through Hard Porcelain Tile, Ceramics, Marble And Slate With Ease. The Integrated Lubricant Aids Cooling And Prolongs Life In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Dry 10mm VBD10 The Dry Diamond Drill Bit Uses Vacuum Brazed Technology Which Allows The Dry Bit To Be Used At A Higher Temperature To Cut Through Hard Porcelain Tile, Ceramics, Marble And Slate With Ease. The Integrated Lubricant Aids Cooling And Prolongs Life In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Dry 15mm VBD15 Diamond Holesaw. Ideal For Porcelain, Ceramic, Stone And Glass. Working Length (mm) 80 Out of Stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 5mm DD5 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 6mm DD6 Cuts All Types Of Glass , Marble, Porcelain ( Grade 5) Granite Slate. £6.73 In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 7mm DD7 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. Out of Stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 8mm DD8 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 10mm DD10 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 12mm DD12 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. In stock |
|
 | Addax Diamond Tile And Glass Drill Bit Wet 20mm DD20 The Wet Diamond Drill Bit Uses Water As A Coolant. It Is Electroplated With Diamond Particles To Enable The Drill To Cut Through Hard Porcelain Tile, Glass, Ceramics, Marble And Slate With Ease. Out of Stock |
|
 | Heller Glass And Tile Drill Bit 3mm x 75mm 3900-50091 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials Main Features Diameter 3mm Overall Length 75mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skiddin.... In stock |
|
 | Heller Glass And Tile Drill Bit 4mm x 75mm 3900-50092 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials. Main Features Diameter 4mm Overall Length 75mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skid.... In stock |
|
 | Heller Glass And Tile Drill Bit 5mm x 75mm 3900-50093 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials. Main Features Diameter 5mm Overall Length 75mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skid.... In stock |
|
 | Heller Glass And Tile Drill Bit 6mm x 75mm 3900-500944 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials. Main Features Diameter 6mm Overall Length 75mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skid.... In stock |
|
 | Heller Glass And Tile Drill Bit 7mm x 85mm 3900-262095 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials Main Features Diameter 7mm Overall Length 85mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skidd.... In stock |
|
 | Heller Glass And Tile Drill Bit 8mm x 85mm 3900-50096 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials Main Features Diameter 8mm Overall Length 85mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skidd.... In stock |
|
 | Heller Glass And Tile Drill Bit 10mm x 85mm 3900-50097 Quickbit Ceramicmaster Drill Bit For Rotary Drilling In Glass And Standard Ceramic Materials Main Features Diameter 10mm Overall Length 85mm Pointed Chisel Edge, Which Can Be Resharpened At Any Time, Facilitates Precise Starting Customised For Use With Cordless Drills Super Fast Changing Between Drills And Bits 1/4" Hex. Shank Prevents The Drill Bit From Slipping In The Drill Chuck Important: Use Only For Rotary Drilling At A Low Speed And Provide Adequate Cooling Apply Masking Tape To Prevent Skid.... In stock |
|
 | Heller Glass And Tile Drill Bits 5PC 24942 This 5 Piece Glass And Tile Drill Bit Set Contains The Following Bits: Sizes 1 X 4mm 1 X 5mm 1 X 6mm 1 X 8mm 1 X 10mm In stock |
|
|